Awesome Micro EDF but not for Beginners

Best Review on Micro F 86 Sabre EDF Tx R

Before getting this plane out of the box, I recommend the following: setting exponential and dual rates in your transmitter and be ready to add some weight on the front because this plane was very tail heavy. I set the expos at 55% for Aileron, Elevator and 45% for rudder. On top of that I set the ailerons at 60% dual rate. This was the only way I was able to fly without destroying the plane on the first attempt because this thing is fast, very fast for a park flyer. I flew it in a 300 ft by 300 ft park area and I was almost going in circles because it covered corner to corner in a matter of seconds at 1/2 to 3/4 of throttle. I also had to add about 6 grams of weight (there is some space under the canopy at the front) to be able to achieve the CG location as instructed in the manual. This is very important because with the CG out this plane will be almost impossible to control. After all these adjustments I have to say this plane is a blast. It flies straight like an arrow and it is beautifully detailed. It is really incredible and a childhood dream come true for us old kids to have such a small scale wardbird jet fly on remote control. Get an extra battery or two because the flight time is about 3 minutes tops. LIke other reviews pointed out, this plane is extremely delicate and you will rip it to pieces if you are not careful. It is best to keep it in the box as much as possible. Other than that, it is a total blast and definitely recommend it for those who have flown rc planes before.

Get your Micro F 86 Sabre EDF Tx R Now!